All Products

Beaker

Tue ,09-2019 15:37:01 pm

Beakers are widely used in research, industry and education. They are ideal for heating, because of the optimum balance between thermal resistance and mechanical strength due to controlled wall thickness at sides, radius and bottom. The spouts wherever incorporated are designed to have excellent pouring characteristics. We offer the following sizes in beakers.

The range includes :
- Sizes Available - 25 ml , 50 ml , 100 ml , 150 ml , 250 ml, 500 ml, 1000 ml , 2000 ml , 5000 ml.
- Beakers, Low Form, with Graduation and Spout, Made from heat Resistant, Low Expansion borosilicate Glass

Download Pdf

Conical Flask

Sat ,06-2020 18:11:01 pm

Conical Flask are widely used in research, industry and education. They are ideal for heating, because of the optimum balance between thermal resistance and mechanical strength due to controlled wall thickness at sides, radius and bottom. The spouts wherever incorporated are designed to have excellent pouring characteristics. We offer the following sizes in Conical Flask

The range includes :
- Sizes Available -  50 ml , 100 ml , 150 ml , 250 ml, 500 ml, 1000 ml .

Download Pdf

Volumetric Flask with Stopper

Sat ,06-2020 18:19:51 pm

Volumetric Flask with Stopper rare widely used in research, industry and education.We offer the following sizes in Volumetric Flask with Stopper.

The range includes :
- Sizes Available - 25 ml , 50 ml , 100 ml , 150 ml , 250 ml, 500 ml, 1000 ml.

Made from heat Resistant, Low Expansion borosilicate Glass.

Download Pdf

Burette with Stop cock

Sat ,06-2020 18:33:52 pm

Burette with Stop cock rare widely used in research, industry and education.We offer the following sizes in Burette with Stop cock.

The range includes :
- Sizes Available - 25 ml , 50 ml , 100 ml .

Made from heat Resistant, Low Expansion borosilicate Glass.

Download Pdf

Pipettes graduated and volumetric

Sat ,06-2020 18:47:54 pm

Take care to look at the volume scale before use: some graduated pipettes empty from full volume to zero, others from zero to full volume; some scales refer to the shoulder of the tip, others to the tip by gravity. Never blowout volumetric (bulb) pipettes, just touch the tip against the inside wall of the vessel.

Rinse out pipettes with a little of the solution to be delivered before commencing the accurate measurement. To prevent cross-contamination, never draw the solution into the pipette filler.

Pipette with Stop cock rare widely used in research, industry and education.We offer the following sizes in Pipette.

The range includes :
- Sizes Available - 1ml ,2ml, 5ml, 10ml, 25 ml , 50 ml , 100 ml .

Made from heat Resistant, Low Expansion borosilicate Glass.

Download Pdf

Filter Membrane Assembly

Sat ,06-2020 19:03:21 pm

  Filter Membrane Assembly

Glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum.

Filtration is a physical, biological or chemical operation that separates solid matter and fluid from a mixture with a filter medium that has a complex structure through which only the fluid can pass. Solid particles that cannot pass through the filter medium are described as oversize and the fluid that passes through is called the filtrate.Oversize particles may form a filter cake on top of the filter and may also block the filter lattice, preventing the fluid phase from crossing the filter, known as blinding. The size of the largest particles that can successfully pass through a filter is called the effective pore size of that filter. The separation of solid and fluid is imperfect; solids will be contaminated with some fluid and filtrate will contain fine particles (depending on the pore size, filter thickness and biological activity). Filtration occurs both in nature and in engineared systems; there are biological  and industrial forms.

Download Pdf

Measuring Cylinders

Sat ,06-2020 20:21:40 pm

A graduated cylinder, also known as measuring cylinder or mixing cylinder is a common piece of laboratory equipment used to measure the volume of a liquid. It has a narrow cylindrical shape. Each marked line on the graduated cylinder represents the amount of liquid that has been measured.

Measuring cylinders  made out of borosilicate glass

The range includes :
- Sizes Available - 25 ml , 50 ml , 100 ml , 250 ml, 500 ml, 1000 ml , 2000 ml 

Download Pdf

Reagent Bottle

Sat ,06-2020 20:33:19 pm

Borosilicate Glass Reagent Bottle With Screw Cap Borosilicate Glass

Color:Transparent

Reagent Bottle with Screw Cap offered are mechanically strong, chemically resistant and are provided with plastic Pouring rings for drip-free operation. Screw Caps and Pouring Rings are interchangeable and are made from PP. The bottles, Screw Caps and Pouring Rings can be sterilised.

The range includes :
 Sizes Available -  100 ml , 250 ml, 500 ml, 1000 ml.

 

Download Pdf

Test Tube

Sat ,06-2020 20:56:57 pm

Test tubes intended for general chemical work are usually made of glass, for its relative resistance to heat. Tubes made from expansion-resistant glasses, mostly borosilicate glass can withstand high temperatures, up to several hundred degrees .

Chemistry tubes are available in a multitude of lengths and widths, typically from 10 to 20 mm wide and 50 to 200 mm long.[1] The top often features a flared lip to aid pouring out the contents.

The range includes :
- Sizes Available - 5ml, 10ml, 25 ml , 50 ml 

Download Pdf

Distillation Apparatus Parnas and Wagner

Sat ,06-2020 21:07:48 pm

Parnas and Wagner Apparatus for distillation of ammonia from kjeldahl digestion has been adopted to incorporate ground glass joints. Comprising of steam generating flask, steamtrap, vacuum jacket, funnel plug, Liebig condenser 200 mm, joint clip S-13 and S-19 with stand and clamps.  

Download Pdf

Water Distillation Assembly Glass

Sat ,06-2020 21:22:24 pm

Water Distillation Assembly  Glass:

Distillation is the process of seprating the components or substances from a liquid mixture by using selective bioling and condesation. Distillation may result in essentially complete separation (nearly pure components), or it may be a partial separation that increases the concentration of selected components in the mixture. In either case, the process exploits differences in the relative volatility of the mixture's components. Inindustrial chemistry, distillation is a unit opration of practically universal importance, but it is a physical separation process,

 

Download Pdf

Soxhlet Apparatus

Mon ,06-2020 22:14:49 pm

Soxhlet Apparatus

Our company has earned accolades in offering Soxhlet Apparatus to the clients. This product is broadly acknowledged among patrons for supreme finishing and accurate dimensions. These products are actively used in various industries as well as in research organization and educational institutes to perform extraction tests.

Product Details:

Material:  Mild Steel

Temperature Range:  50-400 deg. C

Voltage:  230 V

Packaging Type:  Box

Part View Orientation: Vertica

Heating Element: Nichrome

Features:

Soxhlet Apparatus, quick surface heating save extraction time.

Fiber glass hand knitted heating surface

The housing has 2 retort rods and a cross bar

This apparatus has a built in regulator which controls the heater Heating elements have a individual regulators Pilot lamp to indicate working of the elements.
l

Download Pdf

Dropping Bottles

Tue ,06-2020 10:26:34 am

Dropping Bottles :

Blown in Low Density Polyethylene, Polylab Dropping Bottles dispense small uniform drops of liquids when pressed lightly.

sizes:  60 ml ,120 ml

Download Pdf

Wash Bottles

Tue ,06-2020 10:31:13 am

Wash Bottles:

Polylab Wash Bottles are made of low density polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required

Sizes: 125 ml , 250 ml ,500 ml , 1000 ml .

 

 

Download Pdf

Reagent Bottles (Narrow Mouth)

Tue ,06-2020 10:34:28 am

Reagent Bottles (Narrow Mouth)

These Narrow Mouth Regent Bottles are available in polypropylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. The polypropylene Cap has a built in seal ring to make these bottles leakproof.

Sizes : 60 ml , 125 ml, 250 ml, 500 ml , 1000 ml

Download Pdf

Wash Bottles (New Type)

Tue ,06-2020 10:38:50 am

Wash Bottles (New Type)

These bottles are also made of low density polyethylene and are therefore translucent & unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece wash bottle. These bottles are graduated on the outer surface to give an approximate idea about the volume of solutions filled or dispensed.

 

Sizes :  250 ml, 500 ml , 1000 ml

Download Pdf

Wide Mouth Square Bottle

Tue ,06-2020 10:44:10 am

Wide Mouth Square Bottle

This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The built in depressions on two sides provide excellent grip while holding this bottle.

Size : 4000 ml

Download Pdf

Aspirator Bottles

Tue ,06-2020 10:48:21 am

Aspirator Bottles

Polylab Aspirator Bottles are made of polypropylene and are therefore much lighter than glass. These are autoclavable, dependable & durable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.

Sizes: 2 lit ,5 lit , 10 lit , 20 lit 

Download Pdf

Centrifuge Tube Conical Bottom

Tue ,06-2020 10:53:06 am

Centrifuge Tube Conical Bottom

Polylab centrifuge tubes with conical bottom are available in two sizes i.e 15 ml. & 50 ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15 ml. & 50 ml. tubes respectively.

Sizes : 15 ml, 50 ml 

Packing : 100 Pcs

Download Pdf

Centrifuge Tube Round Bottom

Tue ,06-2020 10:55:09 am

Centrifuge Tube Round Bottom

Polylab centrifuge tubes with round bottom are moulded in polypropylene & polycarbonate. These tubes have excellent clarity and are strong enough to be used upto 50,000xG. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical strength

Sizes : 16 ml, 50 ml 

Packing : 100 Pcs

Download Pdf

Oak Ridge Centrifuge Tubes

Tue ,06-2020 10:56:50 am

Oak Ridge Centrifuge Tubes

Oak ridge centrifuge tubes, made of polypropylene, have excellent contact clarity and can be used upto 50,000xG. The screw cap is fitted with silicon O-ring making it totally leakproof. These tubes should not be used below 4°C.

Sizes : 30 ml, 50 ml ,100 ml

Packing : 112 Pcs

Download Pdf

Ria Vial

Tue ,06-2020 11:02:23 am

Ria Vial

These polypropylene/polystyrene tubes are generally used in RIA, Coagulation & bacteriology. The polypropylene tubes are clear and can withstand 3000 RCF during centrifugation while the transparent polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents.

 

Material:Polypropylene/Polystyrene

Sizes: 12 X 75 mm/ PS , 12 X 75 mm/ PP :  Packing 500 Pcs

Cap for 12 mm RIA Tube:  Packing 100 Pcs

Download Pdf

Test Tube with Screw Cap

Tue ,06-2020 11:04:49 am

Test Tube with Screw Cap

 

These polypropylene tubes provide excellent option for RIA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim.

 

Material:Polypropylene

Sizes: 16X100 mm :  Packing 500 Pcs

 

Download Pdf

Rack For Micro Centrifuge(Folding)

Tue ,06-2020 11:08:37 am

Rack For Micro Centrifuge(Folding)

These two-tier versatile racks, made of polypropylene, are autoclavable & can be used dry, in water baths or in freezers. These racks are provided with alpha numeric index for easy sample identification. Racks are stackable even when loaded and have purpose designed label spaces on each side.

Size :100 places for 1.5 ml MCTs 

Packing :6 Pcs

Download Pdf

Float Rack

Tue ,06-2020 11:11:23 am

Float Rack

This float rack molded in polypropylene is quite compact, autoclavable and can hold 16 micro certrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a centeral rod handle for convenient lifting.

 

Material:Polypropylene

Size: 16 MCTs of 1.5ml

Packing: 12 pcs

Download Pdf

MCT Twin Rack

Tue ,06-2020 11:13:43 am

MCT Twin Rack

Polylab provides this twin purpose rack for both 0.5 ml. & 1.5 ml. micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5 ml. MCT's respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube.

 

Material:Polypropylene

Sizes: Rack for 0.5 ml. & 1.5 ml MCTS

Packing :4 Pcs

Download Pdf

PCR Tube Rack

Tue ,06-2020 11:16:25 am

PCR Tube Rack

 

This rack, as the name suggests, is used for keeping PCR tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipettes. A no.of racks can be stacked together to save shelf space.

 

Material:Polycarbonate/Polypropylene

Size : Rack for 96 PCR Tubes of 0.2 ml

Packing : 4 Pcs

Download Pdf

Micro Pestle

Tue ,06-2020 11:18:57 am

Micro Pestle 

This double ended pestle's one end fits 1.5 ml. Micro centrifuge tube & the other one fits 0.5 ml. Micro centrifuge tube.

Packing : 12 Pcs

 

Download Pdf

Desiccator (Vaccum)

Tue ,06-2020 16:56:29 pm

Desiccator (Vaccum)

Polylab desiccators are made of polypropylene and polycarbonate. These autoclable vaccum desiccators can hold vaccum upto 740 mm of Hg for 24 hrs without any greasing. The top dome, moulded in rigid and transparent polycarbonate, gives a crystal clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome. The lower part is made of polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off & vacucum releasing.

 

Material:Polypropylene/Polycarbonate

Size (mm): 150 ,200 , 250 , 300

 

Download Pdf

Kipp's Apparatus

Tue ,06-2020 17:00:41 pm

Kipp's Apparatus

Polylab Kipp's Apparatus made of polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the apparatus. H2S gas then evolved colletcs in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTEE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.

 

Material:High Desity Polyethylene

Size : 250 ml , 500 ml , 1000 ml

Download Pdf

Stirrer

Tue ,06-2020 17:07:15 pm

Stirrer

Made of polypropylene, these stirrers are very useful for stirring different solutions in the laboratory. These stirrers prove to be tough and long lasting.

 

Material:Polypropylene

 

Download Pdf

Test Tube Cap

Tue ,06-2020 17:09:54 pm

Test Tube Cap

This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one.

 

Material:Polypropylene

Cap for Test Tube φ25 mm

Download Pdf

Spatula

Tue ,06-2020 17:17:14 pm

Spatula

Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.

 

Material:Polypropylene

Size:150 mm ,200 mm

 

Download Pdf

Storage Vial

Tue ,06-2020 20:45:01 pm

Storage Vial

 

As the name suggests, these vials are commonly used for storage of biological material, human & animal cells. The Cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack.

 

Material:Polypropylene

Particulars sizes: 1.0 ml ,2.0 ml ,5.0 ml

Packing :  500 Pcs

Download Pdf

Storage Vial with o-ring

Tue ,06-2020 20:47:56 pm

Storage Vial with o-ring

This vial has an O-ring in the cap that makes it absolutely leakproof. Like other storage vials this vial can also be used for storage purposes.

 

Material:Polypropylene

Particulars : 2.0 ml

Packing : 500 Pcs

Download Pdf

Scintillation Via

Tue ,06-2020 20:51:40 pm

Scintillation Via

 

These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.

 

Material:High Density Polyethylene

Particulars : 8 ml , 20 ml

Packing : 100 Pcs

 

Download Pdf

Pipette Pump

Tue ,06-2020 20:57:13 pm

Pipette Pump

 

Polylab presents a fast release pipetting device for precise pipetting & zip quick emptying. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.

 

Material:Acrylonitrile Butadiene Styrene

Particulars Sizes : 2 ml , 10 ml , 25 ml 

Packing : 12 pcs

 

Download Pdf

Micro Tip Box

Tue ,06-2020 20:59:55 pm

Micro Tip Box

The unique feature of these tip boxes is the improved robust hinge design which prevents the top from being easily disengaged from the bottom of the box.

 

Material:Polypropylene

 

Particulars Sizes : For 96 Micro Tips of 2-10 µl , For 96 Micro Tips of 2-200 µl , For 100 Micro Tips of 200-1000 µl

Packing : 6 Pcs

Download Pdf

Pipette Stand (Horizontal)

Tue ,06-2020 21:02:39 pm

Pipette Stand (Horizontal)

This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. This stand can be easily disassembled for space saving storage.

 

Material:Polypropylene

 

 

Particulars Sizes : For 12 Pipettes

Packing : 6 Pcs

Download Pdf

Pipette Stand (Vertical)

Tue ,06-2020 21:04:21 pm

Pipette Stand (Vertical)

This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top discs that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the dissc should be kept parallel to ensure that corresponding holes are being centered.

 

Material:Polypropylene

Sizes : For 28 Pipettes

Download Pdf

Pipette Stand (94 Pipettes-Rotary)

Tue ,06-2020 21:06:01 pm

Pipette Stand (94 Pipettes-Rotary)

Moulded in polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

 

Material:Polypropylene

Sizes : For 94 Pipettes

Download Pdf

Retort Stand

Tue ,06-2020 21:12:37 pm

Retort Stand

These non-corrosive, moulded retort stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm X 750 mm can be screwed into the heavy base giving way to a perfectly stable retort stand.

 

Material: Polystyrene/Polypropylene

Sizes : 225x150 mm-Side Hole , 300 x 200 mm-Centre Hole , 300x200 mm-Side Hole

 

Download Pdf

Fisher Clamp

Tue ,06-2020 21:15:13 pm

Fisher Clamp

 

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

 

Material:Polypropylene

Sizes : Fisher Clamp - Single , Fisher Clamp - Double

Packing : 12 Pcs

Download Pdf

Rack For Petri Dishes

Tue ,06-2020 21:18:20 pm

Rack For Petri Dishes

These Racks are clear acrylic construction with polycarbonate posts. 69101 has a capacity to hold 60 petri dishes of 90 mm size while in 69102 one can hold 56 petri dishes of 60mm. These racks are very useful during inoculation, incubation & Storage. Visibility from all sides enables the culture to be seen & checked during incubation.

 

Material:Polymethyl Methacrylate / Polycarbonate

Particulars : Rack for 90 mm Petri Dishes , Rack for 60 mm Petri Dishes

Packing : 2 Pcs

Download Pdf

Test Tube Stand

Tue ,06-2020 21:20:59 pm

Test Tube Stand 

This autoclavable stand is perhaps the most commonly used test tube stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25 mm dia tubes.

 

 

Material:Polypropylene

Particulars : 16 mm & 25 mm φ Tubes , 25 mm φ Tubes

Packing : 12 Pcs

 

Download Pdf

Test Tube Stand (Round)

Tue ,06-2020 21:25:12 pm

Test Tube Stand (Round)

A handy, little, space saver, this circular twelve place polypropylene test tube stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vetical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.

 

Material:Polypropylene

 

 

Particulars : 19 mm & 25 mm φ Tubes

Packing : 2 Pcs

Download Pdf

Test Tube Stand (3-tier)

Tue ,06-2020 21:30:13 pm

Test Tube Stand (3-tier)

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC Rack has transparent upper & middle plates where as in PP racks, every part is colored & opaque. These autoclavable racks can withstand sub-freezing temperatures.

 Material:Polypropylene

Particulars : 13 mm x 31 Tubes ,16 mm x 31 Tubes ,25 mm x 12 Tubes, 25 mm x 18 Tubes, 32 mm x 12 Tubes,25 mm x 36 Tubes, 13 mm x 18 Tubes , 20 mm x 40 Tubes ,13 mm x 48 Tubes,13 mm x 72 Tubes,

Packing : 2 Pcs

Download Pdf

Draining Rack

Tue ,06-2020 21:32:54 pm

Draining Rack

Polylab Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.

 

Material:Acrylonitrile Butadiene Styrene / Polycarbonate

Particulars : Draining Rack

 

Download Pdf

Beakers

Tue ,06-2020 21:51:49 pm

Beakers

Polylab Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.

 

Material:Polypropylene 

Particulars : 50 ml, 100 ml , 250 ml , 500 ml , 1000 ml 

Download Pdf

Burette

Tue ,06-2020 21:53:47 pm

Burette

This Burette has a transparent acrylic pipe and a leak proof TPX stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofluoric acide & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5%wt/wt of acids or 30% bases.

 

Material:Polymethyl Methacrylate/TPX

Particulars : 25 ml , 50 ml , 100 ml 

 

Download Pdf

Conical Flask plastic

Tue ,06-2020 21:56:45 pm

Conical Flask

 

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autocloavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving.

 

Material:Polypropylene

Particulars : 100 ml , 250 ml , 500 ml

 

Download Pdf

Volumetric Flask Plastic

Tue ,06-2020 21:58:42 pm

Volumetric Flask Plastic

Polylab Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have a good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage.

 

Material:Polypropylene

Particulars : 25 ml , 50 ml , 100 ml, 250 ml , 500ml , 1000ml

Download Pdf

Measuring Jugs

Tue ,06-2020 22:01:43 pm

Measuring Jugs

These handy jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.

 

Material:Polypropylene

Particulars : 250ml , 500 ml , 1000ml , 2000 ml

 

Download Pdf

Petri Dish (Disposable) Polystyrene

Tue ,06-2020 22:06:10 pm

Petri Dish (Disposable) Polystyrene

These transparent, ready to use, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Petri Dishes packed individually in polyethylene bags are sterilized by radiation.

 

Material:Polystyrene

Sizes : 90 mm. Radiation Stz ,60 mm. Radiation Stz ,35 mm. Radiation Stz

Packing : 500 Pcs

Download Pdf

Petri Dish Polypropylene

Tue ,06-2020 22:10:13 pm

Petri Dish Polypropylene

 

These Polypropylene Petri Dishes are clear, unbreakable & autoclavable.

 

Material:Polypropylene

Particulars : 50 mm , 75 mm , 100mm , 150mm , 125mm

Packing : 36 Pcs

 

Download Pdf

Petri Dish (Culture)

Tue ,06-2020 22:11:56 pm

Petri Dish (Culture)

 

This PS Petri Dish with fitting proves excellent for culture experiments. Made in polystryrene, this transparent Petri Dish provides excellent inside view.

 

Material:Polystryrene

 

 

Packing : 36 Pcs

Download Pdf

Soft Loop Sterile

Tue ,06-2020 22:15:20 pm

Soft Loop Sterile

This non-toxic disposable loop is accurate to semi quantitative stand for handling samples.

 

Material:Polystyrene

Particulars : Soft Loopes - 1 µl , Soft Loopes - 10 µl ,Inoculation Needle

Packing: 100 Pcs

Download Pdf

L Shaped Spreader

Tue ,06-2020 22:18:05 pm

L Shaped Spreader

This sterile, smooth spreader enables even spreading of liquid samples across the surface of a jar plate without grouping & cutting the medium.

 

Material:Polypropylene

Particulars : L Shaped Spreader

Packing : 100 Pcs

Download Pdf

Cryo Coders

Tue ,06-2020 22:21:07 pm

Cryo Coders

These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.

 

Material:Polystyrene

Particulars : cryo coders

Packing : 100 Pcs

Download Pdf

Cryo Vial

Tue ,06-2020 22:23:47 pm

Cryo Vial

Cryo vials are normally used for storage of biological material, human & animal cells. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudinal grooves in the base give a non twisting feature to these vials when placed in a cryo rack.

 

Material:Polypropylene

Particulars : 1.0 ml , 1.8 ml , 4.5 ml 

Packing : 1000 Pcs

Download Pdf

Cryo Vial-Internal Thread

Tue ,06-2020 22:26:00 pm

Cryo Vial-Internal Thread

 

Adding to the existing range of cryo vials is this vial which has internal thread in it. The cap fitted with an O-ring screws in to the vial and makes it a leakproof Cryo Vial. These vials are provided with white, prominent graduations and a long marking area for sample identification.

 

Material:Polypropylene

Particulars : 2.0 ml

Packing : 500 Pcs

Download Pdf

Cryo Rack

Tue ,06-2020 22:28:40 pm

Cryo Rack

Polylab Cryo Rack is moulded in polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.

 

Material:Polycarbonate

Particulars :50 Places for 1, 1.8 & 4.5 ml Cryo Vials

Packing : 2 Pcs

Download Pdf

Cryo Box (PC)

Tue ,06-2020 22:30:57 pm

Cryo Box (PC)

Polylab Cryo Boxes are moulded in polycarbonate making it extra strong and autoclavable. These can accommodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190°C to 121°C. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control

 

Material:Polycarbonate

 

Particulars :50 Places for 1 ml or 1.8 ml Cryo Vials ,81 Places for 1 ml or 1.8 ml Cryo Vials ,81 Places for 4.5 ml Cryo Vials,100 Places for 1 ml or 1.8 ml Cryo Vials

Packing : 8 Pcs

Download Pdf

Cryo Box (PP)

Tue ,06-2020 22:33:29 pm

Cryo Box (PP)

 

Moulded in polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built-in spaces to hold vials up to 2ml capacity. Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside.

 

Material:Polypropylene

Particulars : 81 Places for 1 ml or 1.8 ml Cryo Vials , 100 Places for 1 ml or 1.8 ml Cryo Vials

Packing : 4 Pcs

Download Pdf

Funnel Holder

Tue ,06-2020 22:36:20 pm

Funnel Holder

 

Made of Polypropylene, these corrosion free funnel holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided to ensure firm grip on Rods having dia 1/2" or 3/8".

 

Material:Polypropylene

Particulars : Funnel Holder - Single ,Funnel Holder - Double

Packing : 12 Pcs

Download Pdf

Seperatory Funnel Holder

Tue ,06-2020 22:39:55 pm

Seperatory Funnel Holder

This non-corrosive seperatory funnel holder, moulded in polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of separatory funnels. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

 

Material:Polypropylene

Particulars : Seperatory Funnel Holder

Packing : 12 Pcs

Download Pdf

Analytical Funnel

Tue ,06-2020 22:42:29 pm

Analytical Funnel

 

Designed specifically for analytical chemistry, the body of the funnels is 60°. Moulded in PP, these funnels are provided with internal & external ribs to prevent air blockage.

 

Material:Polypropylene

 

 

Particulars : 50mm ,75mm , 100mm

Packing : 72 Pcs

Download Pdf

Buchner Funnel Polypropylene

Tue ,06-2020 22:45:28 pm

Buchner Funnel

Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing. The base of the top portion has perforated filter plate.

 

Material:Polypropylene

Particulars: 70 mm , 110 mm , 90 mm

Packing: 12 Pcs

 

Download Pdf

Laboratory Tray

Tue ,06-2020 22:48:41 pm

Laboratory Tray

 

Needless to say, Polylab Laboratory Tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware,porcelainware & other laboratory instruments.These steam autoclavable trays have tapered walls which prove good for nesting.

 

Material:Polypropylene

Particulars : 450 x 350 x 75 mm ,375 x 300 x 75 mm

Packing:10 Pcs

Download Pdf

Instrument Tray

Tue ,06-2020 22:51:11 pm

Instrument Tray

This autoclavable trays have cover which fits into groove of trays to minimize spillage of meterial. Smaller size can be used to sterilize small instruments whereas the larger size allows pipettes to be fully immersed in disinfectant prior to sterilisizing.

 

Material:Polypropylene

Particulars:220 x 150 x 70 mm , 450 x 150 x 70 mm

Packing :2 pcs

Download Pdf

Utility Tray

Tue ,06-2020 22:54:49 pm

Utility Tray

Adding to the already existing range of autoclavable laboratories trays is the Utility Tray and as the name suggests this polypropylene Trays can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.

 

Material:Polypropylene

Particulars :375 x 350 x 130 mm

Packing : 6 Pcs

Download Pdf

Coplin Jar

Tue ,06-2020 23:02:47 pm

Coplin Jar

 

Polylab Coplin Jar made of Polypropylene, can hold 10 slides of the size 1"x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.

 

Material:Polypropylene

Particulars : Coplin Jar

Packing : 12 Pcs

Download Pdf

Test Tube Baskets

Tue ,06-2020 23:15:04 pm

Test Tube Baskets

 

Polylab Test Tube Baskets are made of Polypropylene.These autoclavable,unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware.These are also useful for storage of test tubes or culture tubes during sterilization or incubation.

 

Material:Polypropylene

Particulars :140 x 120 x 110 mm , 160 x 160 x 160 mm

Packing : 6 Pcs

Download Pdf

Urine and Tool Container

Tue ,06-2020 23:18:00 pm

Urine  and Tool Container

These containers can be used for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these containers have excellent contact clarity and the cap has built-in seal that makes it completely leakproof.

 

Material:Polypropylene

Particulars : 30 ml. , 60 ml 

Packing : 100 Pcs 

 

Download Pdf

Animal Cage

Tue ,06-2020 23:20:11 pm

Animal Cage

Available in two different sizes, these Cages provide excellent shelter for different animal species in the laboratory. The metallic top provides proper ventilation and has provisions for feeding the species.

 

Material:Polypropylene/Stainless Steel

Particulars :290 X 220 X 140 mm ,430 X 270 X 150 mm

Download Pdf

Water Bottle-Animal Cage

Tue ,06-2020 23:22:26 pm

Water Bottle-Animal Cage

 

These water bottles prove to be an excellent accessory for the species kept in the cages.

 

Material:Polypropylene/Stainless Steel

Particulars : Water Bottle - 125 ml , Water Bottle - 250  ml

Packing :12 Pcs

Download Pdf

Stop Cocks

Tue ,06-2020 23:24:47 pm

Stop Cocks

These polypropylene Stop Cocks are fitted with a PTFE plug & have serrated tubulations that accept from 6 mm to 10 mm tubing. These Stop Cocks are absolutely leakproof and are available in two different options i.e. 2 way & 3 way.

 

Material:Polypropylene/PTFE

Particulars : Stop Cock 2 Way, Stop Cock3 Way

Packing : 6 Pcs

Download Pdf

Measuring Cylinders Polypropylene

Tue ,06-2020 23:29:11 pm

Measuring Cylinders Polypropylene

 

Polylab Measuring Cylinders, moulded in Polypropylene are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.

 

Material:Polypropylene

Particulars : 25 ml , 50 ml , 100 ml , 250 ml , 500ml , 1000 ml , 2000 ml

Packing : 24 Pcs , 12 Pcs , 4 pcs

 

Download Pdf

Reagent Bottles (Wide Mouth) 

Tue ,07-2020 12:50:32 pm

Reagent Bottles (Wide Mouth) 

 These wide mouth reagent bottles are available in polypropylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. The polypropylene cap has a built in seal ring to make these bottles leekproof.

Sizes : 60 ml , 125 ml, 250 ml, 500 ml , 1000 ml

Download Pdf

Platinum Crucibles

Tue ,07-2020 13:21:40 pm

Platinum Crucibles

One of the most valuable tools of the analytical chemist is the platinum crucible. Platinum crucibles are commonly used for sample preparation, wet chemistry, ash testing, and Loss on Ignition (LOI) applications.

Platinum crucibles are made with just enough strength required for use in the chemical laboratory. Typically, platinum crucibles and their covers weigh about as many grams as they hold in cubic centimeters. Hence, a platinum crucible with a volume of 25 cubic centimeters weighs 25 grams, including the cover.

Making Platinum Crucibles

This production guideline determines and restricts the thickness of the platinum crucible’s bottom and side wall. The crucibles are crafted from platinum sheets cut into discs or blanks that are rotated over steel forms. During spinning, the discs are pressed with a follower that has a face covering the bottom of the crucible. In doing this, a platinum crucible bottom always has the thickness of the original sheet, and the platinum crucible wall becomes gradually thinner from the bottom to the rim. Other methods like pressing or deep drawing can also be used to form the circular blanks into platinum crucibles.

Pure platinum and popular platinum alloys are typically used to make crucibles. When platinum-rhodium is used, crucibles are made from even thinner sheets, as this alloy is somewhat harder.

All platinum crucibles have a very fine crystal grain. This grain is sometimes achieved by the meticulous hammering of the metal after the spinning process. The best crucibles are considered to be those with the smallest crystal grain.

Crucible Care

Platinum crucibles can have a long life if they are cared for properly. After use, a crucible should be mechanically cleaned. They can be kept in water or a 10-percent hydrochloric acid solution. Water can remove any salts, and hydrochloric acid converts oxides into chlorides, which can then be cleaned off by rinsing.

Selecting a Crucible

 

Pure platinum crucibles have a melting point of more than 1770 degrees Celsius. Crucibles made from 99.95%  percent platinum have excellent resistance to chemical deterioration.

 

 

 

Download Pdf

Silica / Quartz Crucible

Tue ,07-2020 13:42:21 pm

Silica  / Quartz Crucible

Silica /Quartz Crucibles Salient Features of Silica /Quartz Crucibles Manufactured using pure selected indigenous raw material The purity of silica/Quartz  obtained are as high as 99 8 Products confirms to BS Standards Softening Temp 1700 C Annealing Temp 1150 C Working Temp 1900-2000 C Operating temp 1050 C.

we havd all sizes of

CRUCIBLE WITH LID : 15ML | 25ML | 50ML |  100ML 

Crusible Stand ,Plunger , Ash Dish ,Tall form Crusible etc

Download Pdf

Get in touch with us

Enquire Our Price List