All Products

ALL TYPE ELECTRODE

Tue ,09-2019 16:12:13 pm

(a) Unbreakable combines Electrodes (KCL filled)

b) Unbreakable combines Electrodes (gel filled)

c) ORP / Redox Electrode

d) PT 100 sensor Temperature Probe S.S. Body PVC handle

e) Reference Hg/HgCl (KCL filled) electrode with unbreakable PVC sleeve

f) Conductivity Cell Platinum plate with unbreakable PVC sleeve
A = K – 1
B = K – 0.5
C = K – 0.1
D = K – 10

 

Download Pdf

DIGITAL TDS METER

Tue ,09-2019 16:16:04 pm

FEATURES

4 digit LED display

0.01 PPM to 200 PPT in six range

2PPM, 20PPM, 200PPM, 2PPT, 20PPT, 200PPT

Accuracy:±1% ± 1 least count

Standard TDS:  0.5 PPT

Electrode:  ORP - PVC sleeved

Accessories:  Stand set, Screwdriver and Dust proof cover

Download Pdf

CONDUCTIVITY METER

Tue ,09-2019 16:18:19 pm

Features:  4 digit LED display ,01μΩ to 200 mΩ in 6 ranges,200 mΩ , 20mΩ , 2 mΩ , 200 μΩ , 20 μΩ , 2 μΩ

Accuracy:  ± 1% ± last 2 digits

Power required:  230 V AC ± 10%, 50 Hz, 6 VA

Electrode:  Cell K = 1 - PVC sleeved

Download Pdf

AUTOCLAVE (VERTICAL)

Fri ,09-2019 11:56:21 am

Specifications:

• Convenient and reliable method of steam sterilization.
• Inner chamber fabricated with thick S.S.
• Outer Chamber manufactured with M.S/S.S.
• Provided with immersion type heater.
• Lid constructed using S.S. and dies pressed.
• Equipped with pressure gauge, steam release valve and safety valves.
• Pressure controlled using spring valves.
• Supplied with aluminum/S.S. basket.
• Equipped with joint less silicon rubber gasket.
• Working steam pressure upto15 PSI.
• Operated on 230 Volts A.C. only.

Optional accessories:

• Auto cut off.
• Digital temperature indicator cum Controller.
• Foot lifting arrangement.
• Water level indicator.

Sizes: 25 x 45 cm, 30 x 50 cm, 35 x 55 cm, 45 x 60 cm, 55 x 75 cm

 

Download Pdf

Round Vaccum Oven

Fri ,09-2019 11:58:11 am

Round Vaccum Oven

Developed by using sophisticated techniques, our round vacuum oven is fabricated using qualitative stainless steel. Used in diverse industrial applications, our ovens can made tailored as per the requirements of our clients.

Specifications of vacuum oven

Double walled.
• Inside chamber constructed with thick stainless steel 304 Quality.
• Out side chamber manufactured with mild steel sheet pre greased, pretreated and powder coated for rust proofing.
• Proper glass wool insulation between the chambers to prevent heat loss.

Operating temperature ranges from 50°C to 200"C with -2°C accuracy. Uniform drying through vacuum.
• Precise Vacuum control upto 30Hg, which are displayed on Analog gauge.
• For quick and uniform heating, the vacuum chamber is fiited with set of high quality heaters.
• Digital temp indicator cum controller helps in controlling the temperature.
• The Door has a thick tempered toughened glass window and is properly sealed with silicon rubber gasket for observation without disturbing thermal condition.
• Control panel on the front panel, with temperature controller, switches and indicating lamps.
 

Download Pdf

B.O.D. INCUBATOR

Fri ,09-2019 11:59:51 am

Specifications:

  •     Designed Specially biological Oxygen demand determination and other applications like general incubation,  serum studies and enzyme assays tests.
  •     Castor wheel mounted cabinet is double walled.
  •     Inner chamber made of Aluminium / S.S. Outer chamber made of M.S. with powder coating. Full length inner glass / acrylic door permits inspection of specimens with out disturbing the temperature.
  •     Temperature Controlled by Digital Temperature Controller cum indicator. Temperature range 5° to 50°C with an accuracy of 0.5°C.
  •     This unit is fitted with door operated illumination lamp inside the chamber.
  •     Equipped with hermetically sealed compressor.
  •     Air Circulation Fan for maintaining temp. Uniformity through out the chamber.
  •     Flush fitting insulated double walled door has magnetic gasket.
  •     The chamber is provided with modular removable shelves made of S.S. for complete flexibility is use. Inner chamber is fitted with refrigeration evaporator, heater and Air Circulator for creating positive Air flow through out the inner chamber for temperature uniformity.
  •     To work at 230V A.G. only.

  • Optional Accessories:
  • Digital Temperature Indicator cum Controller
  • For Air Draft with FHP Motor
  • Digital timer with Temperature Controller
  • Size Rating
    Cm Inch Watts
    30X30X30 12”X12”X12” 250
    35X35X35 14”X14”X14” 300
    45X45X45 18”X18”X18” 400
    45X45X60 18”X18”X24” 750
    60X60X60 24”X24”X24” 1000
    45X60X90 18”X24”X36” 1250
    60X60X90 24”X24”X36” 1500

Download Pdf

BACTERIOLOGICAL INCUBATOR

Fri ,09-2019 12:05:28 pm

  •  BACTERIOLOGICAL INCUBATOR
  • Incubators are sturdy double walled units
  • Inner Chamber made of S.S. and outer made of Mild Steel with Powder coating.
  • Gap between the walls fitted with glass wool insulation to avoid heat loses
  •  Heating elements are made of high grade chrome plated nichrome wire. Temperature is controlled by thermostat.
  •  Temperature range 5°C above ambient to 60°C and Accuracy: ± 2°C
  •  Air Ventilations is provided on the top of the unit to remove the hot gases I fumes
  •   In Lab type oven heaters are placed in the bottom oldest the unit
  •   All the control switches & pilot lamps are fitted on the front panel
  •   Trays should be supplied with G.I. wire mesh

Optional Accessories

Air Circulation Fan for Uniform Temperature.
• Digital Temp. Controller cum indicator in lie of thermostat with an accuracy of +- 1 degree c.
• S.S Trays.

STANDARD SIZE AVAILABLE:12" X12" X12",14" X14"X14",18" X18"X18",18" X18"X24",24" X24"X24",18" X24"X36",24" X24"X36"

Download Pdf

HOT AIR OVEN

Fri ,09-2019 12:21:19 pm

HOT AIR OVEN

Salient Features:
Our Hot Air Oven are digital. These are developed with Temperature range 50 deg. C to 250/300 deg. C+_1 deg. The thermostatics controls and double walled design make them most suitable to be use in the laboratory. The interiors of these ovens are developed from aluminum or stainless steel & the exterior body is designed from mild steel sheet that is either painted or powder coated. These are configured with the adjustable wire mesh nickel plated trays/aluminum trays and on/off rocker switch with indicator. The capacity of these ovens is 27 tr. to 324 tr. Digital indicator cum controller PID based (Optional). Further, the safety alarm, digital timer and air circulating fan are also optional in our ovens. Voltage range: 220/230 volts A.C. 50 Hz.

STANDARD SIZE AVAILABLE:12" X12" X12",14" X14"X14",18" X18"X18",18" X18"X24",24" X24"X24",18" X24"X36",24" X24"X36"

Download Pdf

DIGITAL VACUUM OVEN

Fri ,09-2019 12:24:11 pm

We bring forth the cutting-edge range of Vacuum Oven with double walled construction. The Vacuum Oven has inner chamber of thick stainless steel 304 quality. The outer chamber of Round & Rectangular Vacuum Oven is made up of mild steel sheet pre-greased and pretreated for rust proofing and is also powder coated. The Vacuum Oven has high-grade glass wool insulation between the chambers to avoid heat loss.
 

Details :

  • Uniform drying under Vacuum
  • Temperature ranges from 50°C to 200°C with ± 2°C a…
  • Precise Vacuum control to 30Hg displayed on Analog…
  • Temperature Controlled by digital Temperature Indi…
  • Vacuum chamber is wrapped with set of high quality…
  • Door has a thick tempered toughned glass window
  • Perfectly sealed with silicon rubber gasket for ob…
  • Proper door alignment to ensure excellent Vacuum p…
  • Positive screw to tighten the lid to obtain perfec…
  • Fitted with diaphragm valves and vacuum gauge
  • Control panel with Temperature Controller, Switche…
  • Working chamber 30 x 22.5 Cm
  • Suitable for 230V, AC, 50Hz
  • Available in rectangular chamber also
  • Vacuum control and relief valves located on front …

Download Pdf

Digital Ph Meter

Tue ,06-2020 21:27:19 pm

DIGITAL Ph METER

FEATURES:  Useful for U.G., Colleges, Industry

                       4 digit LED display, pH: 0 to 14.00      mV: 0 to ± 1.999

                        pH: 0.1                mV: 1

Accuracy:     pH: ± 0.02 pH ± 2 least count mV: ± 0.2% ± 1 least count

Temp. comp:  0 to 100°C

Electronic buffer:  Equivalent signal output of ideal electrode in solution of 9.20, 7.00, 4.00 pH.
Useful for self diagnostic.
Electrode:  Combined PVC sleeved

Accessories:  Stand set, Patch cord for Electronic buffer, Buffer tablets for 9.20, 7.00, 4.00 pH,
Screwdriver and Dust proof cover

Download Pdf

UV- VIS SCANNING SPECTROPHOTOMETER

Tue ,06-2020 21:37:55 pm

FEATURES

Useful for Research, Industry, Biotech, Pharmacy, Biotech

  • Range: 190 nm to 1100 nm
  • Digital readout of %T, O.D. Conc. and wavelength
  • Source : Halogen & D2 lamp
  • Cut off filter IR
  • Resolution : 0.1% in %T, 0.001 in O.D., 1 in 999 for
    Conc. in PC mode
  • Spectral bandwidth 2 nm
  • Wave length accuracy : ± 1 nm
  • Wave length stability : ± 1 nm
  • Reading stability : ± 2 digit
  • 6 point concentration calibration
  • Low volume sample : 1ml
  • Software included EZ CRUZ - 16 SP
  • Can be used with or without PC
  • Power: 230V AC, 50Hz, 100VA
  • Weight : 15 Kg
  • Dimension : 230mm (H) x 525mm (W) x 555mm (L)
  • Sleek, corrosion proof fiber body
  • Feather touch controls
  • IQ, OQ, PQ and 21 CFR as per FDA compliance

Download Pdf

DIGITAL ORP METER

Wed ,06-2020 19:24:02 pm

FEATURES

Readout: 4 digit LED display

Measurement:  ORP emf

Resolution:  1mV

 Accuracy:  ± 0.2% ± 1 least count

 Ranges:  0 to ± 1999 mV

 Electrode:  ORP - PVC sleeved

Accessories:  Stand set, Buffer tablets, Screwdriver and Dust proof cover

 

Download Pdf

Melting Points Apparatus

Sat ,06-2020 09:57:02 am

Melting Points Apparatus

It is usable to estimate the Melting Points of chemicals, Pharmaceuticals, Food Etc.
This is very useful to determine the melting point of any substance.
Max Temp. upto 350 degree c. Consist with aluminium cylindrical block of heating. Radial holes admits a thermometer and glass capillary.
Temp. controlled by energy regulator.
Regulator fitted to the unit and with high, low heat switch.

Download Pdf

Laminar Air Flow Horizontal

Sun ,06-2020 16:17:50 pm

 Laminar Air Flow Horizontal

We deal in manufacturing of horizontal laminar air flow that finds it applications in various hospitals, electronic industry and others. We use high grade component and quality raw material that is tested on various quality parameters and ensure smooth functionality.

Specifications

• Direction of flow: Horizontal
• Cleanliness: CLASS 100
• Velocity: 90 FPM + / -20%
• Hepa Filter: Size and QTY. will depend on the Size selected
• Particle retention: Above 0. 3 micron
• Blower Assembly: 1 / 3 HP, 1440 RPM
• Noise level: 65 decibel + / -5%
• Rate of air flow: 0. 40 to 0. 75 M / Sec. (90 FPM)
• Vibration level: < 2. 5 micron

Download Pdf

Laminar Air Flow Vertical

Sun ,06-2020 16:23:29 pm

 Laminar Air Flow Vertical 

Our vertical laminar air flow has vertical direction flow and particle retention above 0.5 micron. These are appreciated for their low noise and versatile usage. These have been designed with latest technology and can also be designed as per the specifications, provided by our clients.

Application : The vertical laminar air flow cabinets is designed to provide a high degree of protection for process products In laboratories and production facilities. Many critical applications in the medical, pharmaceutical, nuclear-power, and micro electronic fields demand an ultra-clean work environment which is free from biological and particulate contamination.

Operation : Ambient Air is draw in through pre-filter and is introduced in the work zone through the HEPA filter. The average velocity in the work zone is maintained between 0.4 and 0.5 m/s. Air cleanliness in the work zone is better than class 3.5 (100) in accordance with US FED STD 209 E.

Construction : The cabinets are fabricated out of thick board duly sunmica clad or mild steel cabinet duly epoxy coated. The work table is made of thick board which is sunmica clad at top or S. S Table top will be provided as optional accessories. All joints are sealed with silastic sealant. Side panels are provided of thick transparent acrylic sheets.

The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.997% with hot, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced. Blowers are mounted on vibration isolation mounts to minimize vibration. The working is illuminated by fluorescent lightings fitted to the unit. Height of the working table provides comfortable “ Sit Down” working position for the operation to work on 220/230 volts AC. supply.

Air Velocity: Between 0.4 to 0.5 mls +-20%

HEPA Efficiency Pre- filter:99.997% at 0.3 microns with DOP test Washable with an arrestance up to 90% at 5 microns Less than 65 dB (A)

Sound Level:Lux 900 - 1300 Lux

Light Intensity Cleanliness:Standard 209 E Class 100

Federal Power Supply:220 V Single phase 50 Hz

Download Pdf

Autoclave Fully Automatic

Sun ,06-2020 16:36:46 pm

 Autoclave Fully Automatic

Designed to provide complete, efficient sterillization at low cost, these compact sterilizers are ideal for steam sterillization of labware, wrapped or unwrapped dressing, liquid media and similar application.

Standard Features and specification

• Outer Body of SS mirror finish, inner body SS LM 304. Lid of thick SS designed to withstand pressure up to 30 PSI, operating pressure 15-22 PSI, factory set at 15 PSI.
• Fitted with Pressure gauge, safety valve, steam release valve.
• Additional safety with extra steam realese valve & safety temp controller.
• Digital temperature controller / indicator to control temperature / pressure with temp indication. Factory set for 121C (15 PSI) with build in digital adjustable timer with auto cut off.
• Foot lifting arrangement (18"*24*& 22"*30" only)
• electrically operated on 230V / 50HZ

Download Pdf

Water Bath Rectangular

Sun ,06-2020 16:39:15 pm

Water Bath Rectangular 

Rectangular water bath is useful for boiling and general purpose work. Rectangular Water Bath is made up of long lasting single walled kettle element. Made of thick guage stainless steel, the lid is having 6 or 12 holes with concentric rings.

Size Rating Watts Holes
35 x 25 x 10 cm 1000 6 Hole of 3"Dia
40 x 30 x 10 cm    

Download Pdf

Water Bath Constant Temperature

Sun ,06-2020 16:42:00 pm

Water Bath Constant Temperature

Features
• Double walled in construction.
• Inner chamber and lie made of Stainless Steel. Outer chamber made of Mild Steel with powder coating.
• Glass window is fixed on the front for both sides clearobservation while immersion test.
• The gap between the chamber filled with high grade glass wool to minimise the heat loss.
• Temp. Range from ambient to 100 degree c and temp. Controlled by digital temp. Indicator cum controller with an accuracy of +- 0.5 degree c.

A high speed stirrer with a motor of 1/20 HP is fitted to the unit for continuous stirring and this can maintain a uniform heating throughout the chamber.
• The heating mechanism comprises of set of heaters pertaining to fast heating to operated 230 volts AC only.
• Designed for immersion requirements and for external Circulation to maintain Constant temp.
• To Operated 230 Volts AC only.

S. No. Capacity Dimensions
1 2 rack 25x15x17 Cm
2 4 rack 35x 25 x 17 Cm

Download Pdf

Digital Oil Bath

Sun ,06-2020 16:48:02 pm

Digital Oil Bath

We manufacture and supply digital oil bath. Double walled outer mild steel and stainless steel & Inner S.S.304 argon welded digital oil bath is supplied with thermostat. Temp. ranges from 50 ˚C to 300 ˚C ± 5 ˚C.
Applications

Equipment specially designed for tests in the field of Medical, Agricultural, Bio-chemical, R & D & Q.C Laboratories & to suit the various IS standards.

Construction : Double walled, Exterior of CRCA/GI Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S. S. Lid on top.
Circulation : Efficient motor of 1440 RPM top mounted is installed for stirring to get temp uniformity.
Heaters : S. S. tubular heaters for maintaining of temp.
Refrigeration System : Hermitically sealed compressor provides temp. for below ambient conditions, Double stage compressors with cascade system for Temp. -40ºC / -70ºC, Refrigerant CFC Free.
Temp. control : Digital temp controller housing all the controls, switches with PT-100 sensor.
Option : Models available as per GMP/Complete S.S unit, Microprocessor based PID temp. control with printer interface, RS 232 CPC / RS 485 interface for multiple networking of controller.
Validation : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificates traceable to national & International Standards.
Safety Features : Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction. (Applicable to based models only) HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor.
Special care : A suitable K. V. A. Servo Controlled Voltage Stabilizer is recommended.

Download Pdf

Water Bath Serological

Sun ,06-2020 16:50:50 pm

Water Bath Serological 

Features
• Double walled in construction.
• Inner chamber and lie made of Stainless Steel.
• Outer chamber made of Mild Steel with powder coating.
• Gap between the walls filled with glass wool insulation to avoid the heat loss.
• The inner chamber heated with immersion type heating elements is covered.
• Temp. range 5 degree c above ambient to 60 degree c with Accuracy: +-2 degree c.
• Long costing heating elements. To operates on 230 volts A.C. Only.

• A high speed stirrer with a motor of 1/20 HP is fitted to the unit for continuous stirring and this can maintain a uniform heating throughout the chamber.
• The heating mechanism comprises of set of heaters pertaining to fast heating to operated 230 volts AC only.
• Designed for immersion requirements and for external Circulation to maintain Constant temp.
• To Operated 230 Volts AC only.


Available Sizes

Size Dimensions
2 rack 25x15x17 Cm
4 rack 35x 25 x 17 Cm

Download Pdf

Muffle FurnaceBio

Sun ,06-2020 16:55:43 pm

Muffle Furnace

Features
• It is light weight and fast heating equipment.

• Most useful for Ashing, Fasions, Igniting and heat treating of small parts in chemical, industria fields, colleges.
• Out side body made up heavy gauge M.S / G.I duly powder coated Inner muffle with high Temp. Insulating material.
• Maximum temperatures 1000 degree c / 1200 degree c & working temperature 930 degree c / 1130 degree c.
• Temp. controlled by Digital Temperature Controller cum Indicator.
• Heating elements made up of kanthal wire would extremely on the muffle.
• Control panel fitted on top of the units with indicating Lamps & Switches.
• A Uniform heat distribution through all 4 side with kenthal wire.
• A special solid state silver fuse for protection to elements in case of over heating.
• Operates on 230 Volts A.C only.
• Various Sizes available.

Size Ratting watts
(1000 degree c)
Ratting watts
(1200 degree c)
(9" X4" X4") 23*10*10 Cm 1500 2000
(10" X5" X5") 25*13*13 Cm 2000 2500
(12" X6" X6") 30*15*15 Cm 3300 3500
(18" X9" X9") 45*23*23 Cm 6000 7000

Download Pdf

Environmental Test Chamber

Sun ,06-2020 17:00:19 pm

Environmental Test Chamber

Leveraging on our dexterous workforce, we offer environmental test chamber, which is developed from leak proof materials.

Known for their durability and reliability, our test chambers are available in the following standard sizes:

Standard Sizes

S. No. Size in Cms.
1 (45 x 45 x45 Cm.)
2 (71 x 45 x45 Cm.)
3 (85 x 50 x50 Cm.)
4 (100x90x90 Cm.)

Download Pdf

Stability Cooling Chambers

Sun ,06-2020 17:02:55 pm

Stability Cooling Chambers

Also known as Environmental Test Chambers / Humidity Control Ovens – Double Walled – Inner SS – Outer MS – 3" Gap Puff insulation; Full length inner glass door for clear inner vies Outer metal door with magnetic gaskets & lock. Forced air circulation for uniform temperature throughout the chamber. Dual display preset electronic digital Temperature controller Cum Indicator with cooling system by means of Hermetically sealed Compressor Unit coupled with evaporation Coil and Condenser. Temp. Range 10ºC to 60ºC 1ºC; Humidity Range 40% Rh to 90% Rh 3% Rh.

Standard Sizes

Order Code Capacity
  Cu. ft Ltrs
BTI - 3a 3 cft 90L

Download Pdf

Filter Holder

Sun ,06-2020 17:04:51 pm

Filter Holder

These holders for vacuum filtration accept 47 mm diameter filters. the filter support is stainless steel screen

The ring allows autoclaving with a filter in position without stick age of the filter to the support, and also protects from breakage. it has a rim around the upper edge to simplify the positioning of the funnel and to avoid displacement of the filter. And a silicon O-Ring in the avoid

The screen fits between top and base part, and the whole is held together with a practical hand clamp.

The holders are supplied with a silicone lid, but without a bored stopper to fit them onto a suction Flask. Such a stopper must be additionally ordered according to the diameter required. When large numbers of samples are to tested, three or six holders can be used simultaneously buy fitting them on to manifolds.

Application
• Microbiological quality control, e .g testing of water, soft drink, beer and wine.
• Collection of particles for analysis, e. g. for the gravimetric determination of forging solid material in lubricating oils acc. to DIN 51592, and the microscopy of particles in infusion solutions to determine their origin
• Clarifying or ultra cleaning of liquid

Specification

• Material: Stainless steel 316 Quality
• Filter support : stainless steel screen
• Sealing : silicon O –ring
• Funnel Cap : 250 Ml
• Filter diameter required: Membrane filter, 47 mm prefilter, 47mm
• Filtration area : 12.5 cm2
• Maximum operating pressure : Vacuum Only.
• Sterilization : Autoclaving (max.121 °C )

Download Pdf

Laboratory Hot Plate Rectangular

Sun ,06-2020 17:15:53 pm

Laboratory Hot Plate Rectangular

Made up of Cast iron

Size 8 inch x 12 inch Rectangle

Uses Heating upto 50-300 degree celsius 

controled by thermostate with on off switch

 

 

Download Pdf

U. V. Cabinet

Sun ,06-2020 17:26:00 pm

U. V. Cabinet

Ultraviolet light has been used in the Research Laboratory as an Effective Germicide and Virucide. UV light is a fairly efficient disinfectant for most vegetative organisms and viruses. Mainly UV cabinets are used for Chromatographic analysis by Ultraviolet fluorescence

Download Pdf

Heating Mental

Mon ,06-2020 17:02:37 pm

Heating Mental

Body of Heating Mantle is made of one piece aluminium sheet and is logged with special glass wool. The panel is provided with on-off switch, energy control knob and pilot lamp. Provided with joint less hand knitted heating nets of glass yarn capable of withstanding high temperature up to 400°C. Supplied complete with cord and plug, to work on 220V AC 50Hz single phase.

For Flask Cap (ml): 250 ml , 500 ml, 1000 ml , 2000 ml ,5000 ml, 10000 ml ,20000 ml

Wattage:                   150      ,200       ,300          ,450          ,600     , 2x600       ,3x600

Download Pdf

FUME HOOD

Mon ,06-2020 17:09:42 pm

FUME HOOD

These general-purpose Fume Hoods are used with extracting fumes generating during reactions, extractions, etc. wherein gases of mild acidic/alkaline nature are generated. Constructed partly out of CRC Sheet structure and partly out of the wooden board. Working table consists of an acid-resistant top with one sink and one faucet. One electrical utility is provided for operating electrical equipment inside. Fitted with exhaust blower assembly mounted on top of the unit

Options

PVC Exhaust ducting per running feet

Internal Dimensions (WXDXH) (mm):950x600x1200 , 1250x600x1200 ,1550x600x1200

Download Pdf

PCR HOOD

Mon ,06-2020 17:17:12 pm

PCR HOOD

No compromise when space is at a premium. Partially recirculating downflow cabinet with air being filtered by a HEPA (H14) filter with 99.995% overall collection efficiency on 0.1 – 0.2 m particles (MPPS), before entering the work area at a speed of 0.45 to 0.55 m/sec; this ensures a Class 100 (FED STD 209E) – ISO 5 (ISO 14644-1 Standard) environment throughout the work area. Two configurations are available: INWARD air barrier and OUTWARD air barrier, that can be easily chosen by a simple mechanical operation. INWARD air barrier. An air barrier is pulled through the f ront opening and recirculated with the downflow air by a motor blower. 70% of the air is returned to the work area through the main HEPA (H14) filter and 30% is exhausted into the environment through an air filter with gravimetric efficiency of 99% ensuring excellent product protection as well as an outstanding containment. Removable perforated work surface and back wall of the work chamber made of AISI 304 stainless steel Front panels in tempered glass Hinged f ront window Centrifugal Motor blower Soft-touch keys on the control panel provide control of fan and fluorescent lamps lighting Elapsed time-meter for HEPA filter (Option) Tubular Stand (Option) UV lamp.

Options

Elapsed time-meter for HEPA filter.

MS tubular stand duly powder coated.

Work Chamber Dimensions (W x D x H) mm: 750 x 430 x 480 mm

 

Download Pdf

ROTARY VACUUM EVAPORATOR

Mon ,06-2020 17:28:56 pm

ROTARY VACUUM EVAPORATOR 

Evaporation and distillations under vacuum and rotation at controlled high/low temperatures with motorized lift with MICROPROCESSOR DIGITAL CONTROL PANELS. 

Optional:

Overheating protection temperature at 220°C

Oil-Free Vacuum Pump

Liquid Water Circulator Chille

Technical Specications & Ordering Informations

Control Box (Transformer)                      3.3 mm/s

Temperature range (Chiller Circulator)   -10°C to room temperature

Temperature range (Bath) Ambient to    180°C

Temperature adjustment accuracy          0.1℃

Temperature control accuracy                ±0.5℃

Reservoir capacity                                  5 Ltrs.

Range of temperature adjustment          -30℃~30℃

Temperature display                                LED

Type of temperature sensor                     PT-100

Compressor refrigerant                           R134(a) / R-404

Circulating pump throughput                   12L/MIN

Circulating pump head                             6 mm

Machine power                                         350W

Power supply                                            220V 50Hz/60Hz

Operating environment                            10℃~40℃ ≤80% RH

 

Download Pdf

AUTOCLAVE HORIZONTAL (CYLINDRICAL DOUBLE WALLED)

Mon ,06-2020 21:00:05 pm

AUTOCLAVE HORIZONTAL (CYLINDRICAL DOUBLE WALLED)

Horizontal Double Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms. An ideal tool for Laboratories, hospitals, nursing homes, R & D labs, etc. Double walled unit horizontally mounted on a sturdy, heavy M.S. duly painted. Both inner chamber and outer wall made of S.S. Pressure is adjustable f rom 10-20 psi. Fitted with pressure gauge, safety valve, and steam release valve. Available with the separate boiler. For units fitted with S.S. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in the atmosphere after use are provided. Automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation. Automatic Low Water Level Cut-off Device fitted for the general safety of the element. Fitted with Automatic Pressure Control Switch. Fitted with dial thermometer to indicate the inner chamber temperature. Lid is made of thick machined Mild Steel plate lined with stainless steel f rom inside Supplied without jacket (Double walled chamber with separate boiler). Industrial grade energy efficient heaters reduce power bills drastically

OPTIONAL:

Digital Temperature Indicator can be supplied in lieu of dial thermometer. Microprocessor Based Semi-Automatic Digital Controller with Auto-Time Control System. After the set temperature is attained the timer starts automatically and on completion of the set count down/uptime the supply to heaters is cut-off and the system sounds a buzzer alerting the user that the cycle is over. PLC Controller with Automatic Digital Minute Timer and alarm for the end of the cycle. It enables automatic purging of state air, sterilizing hold time for sterilizing period and cycle and with the automatic exhaust of pressure. With scaled Digital Pressure Indicator displayed directly on the main control.

Inner Dimensions (Dia x Depth):   250×450 mm    300×500 mm    350×550 mm    400×600 mm    450×600 mm    550×750 mm

Capacity :                                         22 ltrs               40 ltrs                50 ltrs              78 ltrs                98 ltrs               187 ltrs

Heater Load:                                    3.0 KW             3.0 KW              4.0 KW             6.0 KW             8.0 KW             8.0 KW

Display                                              A separate temperature indicator is provided

Exhaust of Pressure                         Automatic through a manual exhaust valve

Sterilizing Pressure                          1.2 kgf /cm² (15 psi) at 121ºC

Operating Pressure                          From 15 Psi to 20 psi

Pressure Gauge                               0-2.1 kgf /cm² (30 psi)

MOC (Pressure Vessel)                   Stainless Steel (SS-304)

MOC (Boiler)                                    Stainless Steel (SS-304)

MOC (External Wall)                        Stainless Steel (SS-304)

MOC (Lid)                                         Made of thick machined Stainless Steel plate

Tubular Stand and Support Ring     Made of mild steel

Power supply                                   220/230V AC, 50/60Hz or 430/440 Volts, 3 Phase Supply

Gasket                                             Made of Jointless Silicon Rubber

Download Pdf

AUTOCLAVE HORIZONTAL

Mon ,06-2020 21:01:30 pm

AUTOCLAVE HORIZONTAL (CYLINDRICAL DOUBLE WALLED)

Horizontal Double Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms. An ideal tool for Laboratories, hospitals, nursing homes, R & D labs, etc. Double walled unit horizontally mounted on a sturdy, heavy M.S. duly painted. Both inner chamber and outer wall made of S.S. Pressure is adjustable f rom 10-20 psi. Fitted with pressure gauge, safety valve, and steam release valve. Available with the separate boiler. For units fitted with S.S. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in the atmosphere after use are provided. Automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation. Automatic Low Water Level Cut-off Device fitted for the general safety of the element. Fitted with Automatic Pressure Control Switch. Fitted with dial thermometer to indicate the inner chamber temperature. Lid is made of thick machined Mild Steel plate lined with stainless steel f rom inside Supplied without jacket (Double walled chamber with separate boiler). Industrial grade energy efficient heaters reduce power bills drastically

OPTIONAL:

Digital Temperature Indicator can be supplied in lieu of dial thermometer. Microprocessor Based Semi-Automatic Digital Controller with Auto-Time Control System. After the set temperature is attained the timer starts automatically and on completion of the set count down/uptime the supply to heaters is cut-off and the system sounds a buzzer alerting the user that the cycle is over. PLC Controller with Automatic Digital Minute Timer and alarm for the end of the cycle. It enables automatic purging of state air, sterilizing hold time for sterilizing period and cycle and with the automatic exhaust of pressure. With scaled Digital Pressure Indicator displayed directly on the main control.

Inner Dimensions (Dia x Depth):   250×450 mm    300×500 mm    350×550 mm    400×600 mm    450×600 mm    550×750 mm

Capacity :                                         22 ltrs               40 ltrs                50 ltrs              78 ltrs                98 ltrs               187 ltrs

Heater Load:                                    3.0 KW             3.0 KW              4.0 KW             6.0 KW             8.0 KW             8.0 KW

Display                                              A separate temperature indicator is provided

Exhaust of Pressure                         Automatic through a manual exhaust valve

Sterilizing Pressure                          1.2 kgf /cm² (15 psi) at 121ºC

Operating Pressure                          From 15 Psi to 20 psi

Pressure Gauge                               0-2.1 kgf /cm² (30 psi)

MOC (Pressure Vessel)                   Stainless Steel (SS-304)

MOC (Boiler)                                    Stainless Steel (SS-304)

MOC (External Wall)                        Stainless Steel (SS-304)

MOC (Lid)                                         Made of thick machined Stainless Steel plate

Tubular Stand and Support Ring     Made of mild steel

Power supply                                   220/230V AC, 50/60Hz or 430/440 Volts, 3 Phase Supply

Gasket                                             Made of Jointless Silicon Rubber

Download Pdf

COD Digester

Mon ,06-2020 21:24:52 pm

COD Digester is the most accepted thermo reactor for determination of Chemical Oxygen Demand in various substances. Chemical Oxygen Demand (COD) is a measure of the capacity of water to consume oxygen during the decomposition of organic matter and the oxidation of inorganic chemicals such as ammonia and nitrite. COD Digester Measurements are commonly made on samples of waste waters or of natural waters contaminated by domestic or industrial wastes. Chemical Oxygen demand is measured by COD Digester as a standardized laboratory assay in which a closed water sample is incubated with a strong chemical oxidant under specific conditions of temperature and for a particular period of time

Applications And Key Features :

  • Designed for digestion of COD test samples and multi-function dry bath heating.
  • Precise temperature control from ambient + 5 to 150 c with + 1 oC accuracy.
  • User's self-compensation functions for temperature to counter for difference between block temperature and sample temperature.
  • Fitted with microprocessor based digital temperature indicator cum controller for auto control with respect to time and temperature and is also fitted with in-built buzzer timer for auto time control to indicate cycle end.
  • Microprocessor based digital temperature Indicator cum controller having individual display for set value and process value.
  • Size of heating block: 270 mm (L) x 150 mm (W) x 70 mm(D).
  • Recessed well / Cavity accommodates aluminum insert block.
  • Samples after being digested for 2 hours can be analyzed using calorimeter or conventional titration method
  • High performance and user friendly controls combine to produce a specification which offers exceptional efficiency and reliability.
  • Excellent temperature control
  • Uniform and stable heating
  • New compact size

Options :

  • Spare digestion tube with condenser
  • Spare digestion rack for 15 tubes
  • Our ceaseless R & D and improvements may result in design, specification and colour changes at any time.
  • Spare digestion tube with condenser
  • Spare digestion rack for 15 tubes
  • Our ceaseless R & D and improvements may result in design, specification and colour changes at any time.

TECHNICAL SPECIFICATIONS:

Controller Microprocessor based digital temperature indicator cum controller
Display Led digital display with set valve (Sv) and process Valve (Pv)
Block dimensions (W x D x H) (in mm) 270 mm (L) x 150 mm (w) x 70 mm (D)
Heater load 1.0 kw
Tube cavity 40 mm (ø) x 65 mm (d)
No. of cavaties 15 holes to accommodate 15 samples
Glass tube size Supplied with 15 nos. Of glass tubes of size 38 mm (ø) x 200 mm (Length)
Glass air condenser size Supplied with 15 nos. Of air condensers of 600 mm length each.
Sample size 20ml
Temperature Range Ambient + 5 C to 150 oC
Temperature Accuracy + 1 oC
Sensor Rtd (pt 100)
Material Exteral Powder coated crc steel
Block Polished aluminium
Timer (Sad) (Auto time control unit) Fitted with automatic digital minute timer which starts automatically when set / desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically.
Buzzer Alarm for cycle end
Power supply 230 V Ac, 50 / 60 hz

Download Pdf

CARBON DI-OXIDE INCUBATOR(COD)

Mon ,06-2020 21:38:37 pm

COD  INCUBATOR:

Developed with the introduction of new techniques with highest precision. High is demand in medical research and pharmaceutical industry. Provides sterile and favorable conditions for cultivation are required for cells to grow in germ free environment.

Features:

 CO2 Incubator is developed with the introduction of new techniques as compared with common CO2 Incubators.

This type provides faster heating and fewer errors of temperature precision.

Outer made of CRC sheet duly powder coated. Inner made of specular stainless steel by argon-arc welding techniques and semicircular arcs at corners ensure easy cleaning.

Microprocessor temperature controller makes temperature stability Independent alarm system for temperature limiting ensures experiment run safely and no accident would happen.

Temperature range f rom Ambient +50C to 500C.

Microorganism filter at inlet provides 100% filtrated gases

Equipped with fully automatic CO2 pressure-releasing and purging valve.

IR CO2 sensor for precise CO2 inside the chamber with a CO2 control range of 0~20%.

Technical Specications & Ordering Informations

Capacity 151 ltrs Disinfection

UV LIGHT DISINFECTION MOC

Inner Chamber Stainless Steel (SS-304)

Temperature Range Non-Refrigerated, Temp. Ambient +50C to 500C

Temperature Control 0.10C

Temperature Stability ± 0.30C CO2

Control Range 0~20% (Infrared Sensor)

CO2 Recovery ≤ Calibration x 1.2min

Humidifying Method Natural Evaporization Ambient Temperature +5 ~350C

Incubator Sterilizer UV method

No. of Shelves 3

Interior Dimension (WxDxH) 460 (W) x 530 (D) x 605 (H) mm

Input Power 300W

Electrical Requirement 220V, 50Hz

Download Pdf

HOT PLATE WITH MAGNETIC STIRRER

Mon ,06-2020 22:05:13 pm

HOT PLATE WITH MAGNETIC STIRRER:

 

Speed range (rpm) :  Max. 1000 RPM

Temperature Range:  120°C

Capacity:  2 Lit

 

 

Download Pdf

Water Still Manesty Type

Mon ,06-2020 22:19:30 pm

 Water Still Manesty Type

Manesty Type Water Still, unit is made up of complete SS, designed to provide pyrogen free distilled water of very high degree of purity. Easy wall mounting condenser cave be opened easily for periodic cleaning. The still is fitted with immersion type heating element. It is provided with iron bracket to be fixed on the wall. Easy replaceable heating elements The lid perfectly rest and get inside the collar on head of the tank which avoids loss of steam and jumping of lid. Various sizes available.

Features:

Sturdiness ,Easy installation , Anti-corrosive

Product Details:

Usage/Application Laboratory
Type Manesty
Material Stainless Steel
Phase Single
Power Source Electricity
Voltage 220V

 

Download Pdf

Digital Bomb Calotimeter

Thu ,06-2020 18:17:09 pm

Digital Bomb Calotimeter

  is  used  for  determination  of  calorific  value  of  liquids  and  solids.  These  find  wide  application  in  various  industries  such  as  Power,  Pharma,  Engineering  college,  chemical  and  others.  Designed  using  advanced  technology,  our  range  is  known  for  its  high  performance,  accurate  dimension  and  long  service  life.  Further,  all  parts  of  the  outfit  have  been  finished  and tested  according  to  the  specification  of  various  national  as  well  as  international  standards.

SS  316   is  used  to  fabricate  Combustion  Bomb  and  its  other  vital  parts  to  ensure  the  maximum  safety  of  the  user.  Outer  jacket  made  up  of  S.S.  is  filled  with  highly  insulated  material  so  that  heat  transfer  from  /  to  the  system  is  practically  nil  &  no  cooling  corrections  are  required  to  get  the  final  result.

Download Pdf

Digital Centrifuge Machine

Sun ,07-2020 16:30:45 pm

Digital Centrifuge Machine

Product Specification 

The best model for clinical, Pathological, Biochemistry and Pharmacy Labs. It is also most suitable for infertility labs where low speed is required.

Speed   0-4000RPM

Material   Mild Steel

Phase      Single phase

Portable  Bench Top Centrifuge Machine. The body is finished in powder coating.

Fitted with digital speedometer, Digital timer of range 0-59 minutes and variable speed regulator thru rheostat for long life.

completed with 4/8x15ml Swing out head,

Voltage    (Volt) 110-220 V

Download Pdf

Nitric Acid (virgin in tanker )

Fri ,07-2020 13:25:47 pm

Nitric Acid (virgin in tanker )

Formula : HNO3

Color : Colorless ,yellow or red fuming liquid

Oder : Acrid, Suffocating

Nitric acid (HNO3), also known as aqua fortis (Latin for "strong water") and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water.

Uses : The main industrial use of nitric acid is for the production of fertilizer.

Download Pdf

Get in touch with us

Enquire Our Price List